Using Drones to Manage Orchards: A Grower's Experience

Created with SARE support
2026 | 5 pages

Spray drones are gaining traction in specialty crop production, and growers want real-world performance data.

With support from an NCR-SARE Farmer Rancher Grant, Gretchen Merryweather tested a DJI Agras T30 for a full season. She has owned Sweetland Orchard in Minnesota since 2010, where she grows 5,000 apple, pear, and tart cherry trees on six acres. Her guide covers daily field logistics, lessons learned, and a list of aerial-approved pesticides.

Key Findings

Merryweather said drone spraying is neither universally superior nor inferior to traditional airblast spraying; its value depends heavily on orchard layout, terrain, and grower preferences. She found drone application to be a viable alternative to tractor spraying based on specific farm characteristics:

  • Orchard Layout & Scale: Operating on a smaller scale (roughly 6 acres) with short tree rows oriented in multiple directions (east-west, north-south, and northeast-southwest) made tractor maneuvering excessively time-consuming.
  • Terrain & Weather Access: Wet spring ground conditions and steep or challenging elevations made tractor traversal difficult, whereas aerial application bypassed soil compaction and traction issues.
  • Operator Preference: Drone spraying suited a management style favoring digital technology and flight planning over engine and hydraulic maintenance.
  • Equipment Realities: Using a DJI Agras T30 (8-gallon tank) with three batteries required careful time management. Flight time averaged roughly 10 minutes per battery, while standard indoor charging took 40 minutes per battery (though faster, generator-powered field chargers are available).

Practical Recommendations for Producers

Based on Merryweather's field trials, growers considering or adopting drone-based spray programs might want to keep the following operational strategies in mind:

  1. Stage Supplies in the Field to Save Battery Life: Flying a loaded drone from a central barn or charging station to the orchard wastes critical battery capacity. Transport the drone, fully charged batteries, remote, water jugs, measurement tools, PPE, and spray materials directly to the orchard edge using a utility vehicle (UTV).
  2. Prioritize Liquid Formulations Over Dry Powders: Because many agricultural spray drones lack built-in tank agitation, dry materials—especially wettable powders—are prone to settling and clogging nozzles. Modify spray programs to use liquid formulations whenever possible. If a dry product is necessary, opt for a water-dispersible granule (WDG/WG) rather than a wettable powder (WP).
  3. Pre-Mix Thoroughly Before Loading: At a small scale, you don't need expensive mixing rigs. Merryweather suggests using a dedicated, screw-top 5-gallon container to mix water and materials in the proper order by manually shaking and inverting the jug, then alternating pouring the slurry and clean water into the drone's tank.
  4. Manage Spray Area Perimeters and Wind: Spray coverage tends to drop off along the outer borders of mapped flight zones. To prevent under-application on perimeter trees, map larger spray blocks to minimize border edges (accepting that you will need to pause mid-block for battery swaps) and adjust flight boundaries daily based on wind speed and direction.
  5. Monitor University Research for Spray Volumes: While spraying label-minimum gallons per acre (GPA) at 18 feet above the ground in alternate row passes yielded acceptable coverage on water-sensitive paper at Sweetland Orchard, ongoing research at Penn State and Michigan State University generally recommends 15–25 GPA for tree fruit. Watch for forthcoming extension guidelines on optimal nozzle types and spray patterns.
  6. Maintain Standard Clean-Out Protocols: Flush and rinse the drone's tank and spray lines thoroughly after every application, using the same hygiene standards as conventional airblast sprayers.

Reference Guide: Tree Fruit Pesticides Approved for Aerial Application

To help growers select drone-compatible materials (favoring liquids over dry formulations), Merryweather compiled a table of commonly used tree fruit insecticides, fungicides, and plant growth regulators approved for aerial application, along with their formulation types and label-specified aerial Gallons Per Acre (GPA). Download the guide to view the table.

(Note: Always consult current product labels and state regulations before making aerial applications, as label approvals and GPA requirements may change.)

Share this:

Want more information? See the related SARE grant:

This material is based upon work that is supported by the National Institute of Food and Agriculture, U.S. Department of Agriculture through the Sustainable Agriculture Research and Education (SARE) program. Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and should not be construed to represent any official USDA or U.S. Government determination or policy.